室内のLED表示画面に水が入ったらどうすればいいですか？ 難しい話は抜きにして！ 今すぐ解決する方法に従ってください。ただし、LEDディスプレイ画面が72時間以上エアボックス内にある場合、画面は基本的に修理されていないため、次のことはあまり役に立たない可能性があります。 したがって、ディスプレイ画面本体が水に入るときは、時間内に対処する必要があります。
Step 1 Dry the LED display screen that has entered the water, and it must be completely dry.
Step 2 The LED display screen is energized and aged, and the operation and debugging are carried out by the following steps:
(1) Brightness 10 percent , power on for 8-12 hours
(2) 30 percent brightness, 12 hours power on
(3) Brightness 60 percent , power on for 12-24 hours
(4) Brightness 80 percent , power on for 12-24 hours
(5) Brightness 100 percent , power on for 8-12 hours
After completing the above steps, it can basically return to normal.
【Notice】
(1) Facing the problem of water ingress into the LED display screen, it must be dealt with in time
(2) If the water ingress situation is not dealt with in time, the stability of the display screen will decrease
(3) Do not put the flooded LED display screen into the air box, it will easily cause the LED etc. to break
【Summarize】
Regarding the water ingress situation of the indoor LED display screen, the general sentence is that it must be dealt with in time!
