LED display is a relatively common electronic product. It has the advantages of energy saving and environmental protection and is welcomed by many enterprises. So what is the installation process like before using it? Next, let the editor of YONGS LED display tell you about the installation process of LED display?
1. How to install the LED display
Before the installation of the display screen, we notify the construction party to conduct a survey on the installation site. After the construction party proposes an installation plan, the construction can be carried out only after the approval of our technical director and the person in charge of the site.
2. LED display installation location
The construction party should carefully measure the installation position before installation. After installation, the display screen should be symmetrical, harmonious and beautiful with the original building. If the above effect cannot be achieved after installation, it should be modified and adjusted immediately.
3. Software test of display screen
Before the control system of the display screen leaves the factory, the construction should confirm the test content of the display screen with the manufacturer.
4. During the construction process, the construction party cannot destroy the original decoration structure of the building without authorization. If the original decoration structure needs to be changed due to the restrictions of the construction site, the construction must be approved by the manufacturer and the person in charge of the site. After the installation, the original decoration must be restored. As a result, the aesthetics of the original building must not be damaged.
5. Installation of display auxiliary facilities
The switch, leakage protector and network interface of the display screen must be complete. Before installing these auxiliary facilities, the installation location must be confirmed by the person in charge of the site before installation.
